The FreeBSD Diary

The FreeBSD Diary (TM)

Providing practical examples since 1998

If you buy from Amazon USA, please support us by using this link.
Article Feedback - ZFS: Resizing your zpool
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Log In   Newer Topic  |  Older Topic 
 Hero Worship
Author: BlueCoder2 
Date:   08-08-10 21:19

This right here is why you are my hero. I've been wanting ZFS since it came out but was both waiting for the code to mature and for prices to come down enough enough to make my raid5 array long obsolete. Who would have thunk it, me actually wanting/preferring software raid but the features are too hard to resist. 1.8 * 7 = Just over 12 TB, enough to make a grown geek cry.

I have to admit I only just skimmed over the whole thing the first time but I'm going to have to go back and reread it a few times. Still not sure why you created the sparse files/md drives. I though ZFS had a simple add to pool command.

Anyways, thank you for sharing your Diary all these years.

Reply To This Message
 Re: Hero Worship
Author: Dan 
Date:   09-08-10 02:04

You can add HDD to a pool, but you cannot go from raidz1 to raidz2 for example.


It is not possible to add a disk as a column to a RAID-Z, RAID-Z2, or RAID-Z3 vdev. This feature depends on the block pointer rewrite functionality due to be added soon. You can however create a new RAID-Z vdev and add it to the zpool.

I should explain this in more detail. In short, I had to create a 7 vdev array with only 5 physical HDD.


Reply To This Message
 Forum List  |  Threaded View   Newer Topic  |  Older Topic 

 User Login
 User Name:
 Remember my login:
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
How to get the most out of the forum