|
Author: Matthew
Date: 31-01-03 13:39
Hello,
I have a Toshiba Portege 7010ct with a fresh install of the 5.0 release. I've noticed that the lid switch is now detected on boot (as acpi_lid0) and when closed, puts the laptop into sort of a standby profile(?) which causes pcmcia to be turned off. I'm pretty sure that changing the power source causes the same problem.
--
-bash-2.05b$ sysctl hw.acpi
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: S1
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 0
hw.acpi.s4bios: 1
hw.acpi.verbose: 0
hw.acpi.disable_on_poweroff: 1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 30
hw.acpi.thermal.tz0.temperature: 3332
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 3652
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 3662
hw.acpi.thermal.tz0._ACx: 3652 3652 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.battery.life: 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
--
I'd be much obliged if someone could explain how to reject these events. I'd like the lid switch to just turn off the lcd like in the 4.7 release. As for sound, to get it working in the previous release, I would just add 'options PNPBIOS' and 'device pcm' to my kernel config and recompile. Is there an equivalent in the 5.0 release?
Thanks,
Matthew
|
|
Reply To This Message
|
|
Author: Matthew
Date: 02-02-03 05:51
I solved the lid problem with:
/sbin/sysctl -w hw.acpi.lid_switch_state=NONE
Input on the kernel problem would be awesome, though. There has to be some command to enable pnp in the 5.0 kernel, right?
Thanks,
Matt
|
|
Reply To This Message
|
|
