The FreeBSD Diary

The FreeBSD Diary (TM)

Providing practical examples since 1998

If you buy from Amazon USA, please support us by using this link.
[ HOME | TOPICS | INDEX | WEB RESOURCES | BOOKS | CONTRIBUTE | SEARCH | FEEDBACK | FAQ | FORUMS ]
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Log In   Newer Topic  |  Older Topic 
 Tests not accurate
Author: Luke 
Date:   15-01-06 22:36

I noticed that with one test you used identical drives, but with other tests you used different models and even brands of drives. i've read information on hackers@ and other sources in the past stating that when setting up a raid environment, you should try to use the same type of drives. Using drives with different performance characteristics can cause one drive to be "faster" most of the time and defeat the purpose. If you think about it, raid 1 must write data to both disks and can read from either one. Each vendor has different cache and write timings, etc.

That being said, I have a raid 1 setup using gmirror. At the time i setup the box, it was running 5.4 with a patched ata driver to support my sata controller. The onboard raid was not supported. I upgraded the machine to 6.0 release and noticed a large improvement in gmirror. The drives are identical SATA western digital 80gb drives with 8mb cache. (same model, etc) Performance since I upgraded to 6.0 release has been excellent. The array often beats my single ultra 160 seagate 6mb cache 72gb 10k drive.

Reply To This Message
 
 Yes, they are accurate. :)
Author: Dan 
Date:   13-02-06 16:51

I use two disks from different manufacturers to improve the reliability of the RAID array. If there is a defect in the drive, and both drives are different brands, you're much less likely to have a double failure in a short period of time (i.e. you lose both drives).

--
Webmaster

Reply To This Message
 Forum List  |  Threaded View   Newer Topic  |  Older Topic 


 Forum List  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
How to get the most out of the forum

phorum.org