The FreeBSD Diary

The FreeBSD Diary (TM)

Providing practical examples since 1998

If you buy from Amazon USA, please support us by using this link.
[ HOME | TOPICS | INDEX | WEB RESOURCES | BOOKS | CONTRIBUTE | SEARCH | FEEDBACK | FAQ | FORUMS ]
FreeBSD Support
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Log In   Previous Message  |  Next Message 
 why i cant use services from 2nd subnet.
Author: K0re 
Date:   19-10-00 23:27

hi.
I cant use services based on FreeBSD 4.0 - Realese (with Bridge compiled in kernel) from subnet2 - for ex. i cant telnet on FBSD from there - opposite to subnet 1 wich works fine.


FBSD z Bridge
- - - - - - - - -
Subnet1 | | Subnet2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| | | |
NT(192.168.0.2/25) |<===>| W98 (192.168.0.130/25)
gw (192.168.0.1 - fxp0) | | | | gw (192.168.0.129 - ed1)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| fxp0 ed1 |
- - - - - - - - - -
fxp0 192.168.0.1/25
ed1 192.168.0.129


> netstat -nr
Routing tables

Internet:
Destination Gateway Flags Netif Expire
127.0.0.1 127.0.0.1 UH lo0
192.168/25 link#1 UC fxp0 =>
192.168.0.128/25 link#3 UC ed1 =>
...

> ifconfig fxp0
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.1 netmask 0xffffff80 broadcast 192.168.0.127
inet6 fe80::2d0:b7ff:feaf:a29d%fxp0 prefixlen 64 scopeid 0x1
ether 00:d0:b7:af:a2:9d
media: autoselect (100baseTX <full-duplex>) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP
> ifconfig ed1
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.129 netmask 0xffffff80 broadcast 192.168.0.255
inet6 fe80::280:48ff:feef:9b3f%ed1 prefixlen 64 scopeid 0x3
ether 00:80:48:ef:9b:3f
> dmesg
...
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xe800-0xe83f mem 0xe3400000-0xe34fffff,0xe3500000-0xe3500fff irq 11 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:b7:af:a2:9d
fxp0: supplying EUI64: 00:d0:b7:ff:fe:af:a2:9d
ed1: <Compex RL2000 PnP Series Ethernet Adapter> at port 0x220-0x23f irq 5 on isa0
ed1: address 00:80:48:ef:9b:3f, type NE2000 (16 bit)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 10 packets/entry by default
DUMMYNET initialized (000106)
IP Filter: initialized. Default = pass all, Logging = enabled
IP Filter: v3.3.8
fxp0: starting DAD for fe80:0001::02d0:b7ff:feaf:a29d
ed1: starting DAD for fe80:0003::0280:48ff:feef:9b3f
ed1: DAD complete for fe80:0003::0280:48ff:feef:9b3f - no duplicates found
fxp0: DAD complete for fe80:0001::02d0:b7ff:feaf:a29d - no duplicates found
....

> cat /etc/hosts
127.0.0.1 localhost.fbsd.main localhost
192.168.0.1 FBSD_fxp0
192.168.0.1 fbsd.main fbsd
192.168.0.2 K0re
192.168.0.129 FBSD_ed1
192.168.0.130 M0ni

> cat /etc/host.conf
hosts
bind

> cat /etc/hosts.allow
...
ALL : 192.168.0.2 : allow
ALL : 192.168.0.130 : allow
...

pings are working btw hosts - only as ive told before subnet 2 cant use services from FBSD
I can ping from NT to W98 soo i think that bridge works fine.
Whats wrong ?


Disconect ;-(
Status_Mail:=End;
K0re Disconector !
All Rights to K0reŽ

GOD is REAL unless he is declareted as an INTEGER or TRUE = FALSE;

 Reply To This Message  |  Forum List  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 why i cant use services from 2nd subnet.   new
K0re 19-10-00 23:27 
 RE: why i cant use services from 2nd subnet.   new
Dan Larsson 20-10-00 08:53 


 Forum List  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
How to get the most out of the forum

phorum.org