The FreeBSD Diary

The FreeBSD Diary (TM)

Providing practical examples since 1998

If you buy from Amazon USA, please support us by using this link.
[ HOME | TOPICS | INDEX | WEB RESOURCES | BOOKS | CONTRIBUTE | SEARCH | FEEDBACK | FAQ | FORUMS ]

FreeBSD Support
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Log In   Newer Topic  |  Older Topic 
 Problems with Disk Controller Adaptec SAS
Author: leopaulo 
Date:   22-08-07 17:10

Hi,

I'm with a big problem.
I'm trying to install the FreeBSD 6.2, but the OS no
recognize my SAS disks.
I'm using one Adaptec RAID 3805 SAS in RAID0.

My computer informations are:
CPU: Intel Xeon Quad-Core 1.6GHZ
Motherboard: Supermicro X7DB3
Memory: 4GB Kingston DDR2 667MHZ
HD: 3x 300GB Seagate SAS
Disk Controller: Adaptec RAID 3805
OS: FreeBSD 6.2

When I try to install the FREEBSD, the OS no recognize the
disks, and the controller.

In Adaptec website have one drive for FreeBSD, but I don't know how
I use this drive in instalattion of FreeBSD.

Somebody pass for this problem?

Reply To This Message
 
 Re: Problems with Disk Controller Adaptec SAS
Author: Dan 
Date:   22-08-07 20:49

Did you check that Adaptec RAID 3805 is supported by FreeBSD 6.2? If so, where did you see this?

--
Webmaster

Reply To This Message
 
 Re: Problems with Disk Controller Adaptec SAS
Author:  
Date:   14-09-07 14:08

Hey,

I built a release ISO of FreeBSD-6.2 32-bit x86 with some code from the FreeBSD 6.0/6.1 drivers off of the Adaptec website so the install disc comes up with support for the Adaptec 3405 and 3805. It is based on 6.2-STABLE.

I was able to use it to install fresh onto a system with an Adaptec 3405.

If you need a link to the ISO just contact me at the website below (please use the e-mail in the contact area) and I'll send you the link.

Steve



Post Edited (14-09-07 10:09)

Reply To This Message
 
 Re: Problems with Disk Controller Adaptec SAS
Author: wynand 
Date:   20-11-07 09:32

holisticsolutions

hi, could you perhaps provide a link where i can find the above mentioned ISO ? (It has been edited)

even better if you could provide a howto on how you did it, i have been trying for 3 days now without any luck.

Thanks
Wynand

Reply To This Message
 Forum List  |  Threaded View   Newer Topic  |  Older Topic 


 Forum List  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
How to get the most out of the forum

phorum.org