|
Author: leopaulo
Date: 22-08-07 17:10
Hi,
I'm with a big problem.
I'm trying to install the FreeBSD 6.2, but the OS no
recognize my SAS disks.
I'm using one Adaptec RAID 3805 SAS in RAID0.
My computer informations are:
CPU: Intel Xeon Quad-Core 1.6GHZ
Motherboard: Supermicro X7DB3
Memory: 4GB Kingston DDR2 667MHZ
HD: 3x 300GB Seagate SAS
Disk Controller: Adaptec RAID 3805
OS: FreeBSD 6.2
When I try to install the FREEBSD, the OS no recognize the
disks, and the controller.
In Adaptec website have one drive for FreeBSD, but I don't know how
I use this drive in instalattion of FreeBSD.
Somebody pass for this problem?
|
|
Reply To This Message
|
|
Author: Dan
Date: 22-08-07 20:49
Did you check that Adaptec RAID 3805 is supported by FreeBSD 6.2? If so, where did you see this?
--
Webmaster
|
|
Reply To This Message
|
|
Author:
Date: 14-09-07 14:08
Hey,
I built a release ISO of FreeBSD-6.2 32-bit x86 with some code from the FreeBSD 6.0/6.1 drivers off of the Adaptec website so the install disc comes up with support for the Adaptec 3405 and 3805. It is based on 6.2-STABLE.
I was able to use it to install fresh onto a system with an Adaptec 3405.
If you need a link to the ISO just contact me at the website below (please use the e-mail in the contact area) and I'll send you the link.
Steve
Post Edited (14-09-07 10:09)
|
|
Reply To This Message
|
|
Author: wynand
Date: 20-11-07 09:32
holisticsolutions
hi, could you perhaps provide a link where i can find the above mentioned ISO ? (It has been edited)
even better if you could provide a howto on how you did it, i have been trying for 3 days now without any luck.
Thanks
Wynand
|
|
Reply To This Message
|
|
